Posts per page   25    50    100   

Featured posts


For a high-resolution version of this cut sheet to have translated and/or printed,  Please complete the form, Creative Brief Task Request

UPDATE 07/11/22: "15’ Twin Line Steel Braided Hydraulic Hose Included" line removed per Dave Ricca.

This guide arranges HYTORC Product and Service videos by category for easy reference.  The guide provides a great self-paced learning program allowing the user to work their way through HYTORC videos one category at a time.  Generally most all these vides are public and listed on our HYTORC YouTube channel.

Customer required a method to bolt the bridge bolts on their separator that can provide credible repeatable torque values to each bolt, this is due to the excessive levels of vibration evident on the plant superstructure

To request a high-resolution version to be translated and/or printed, please complete the form, Creative Brief Task Request.

Email format of the HYTORC Bolting Manager cut sheet.

To request a high-resolution version to be translated and/or printed, please complete the form, Creative Brief Task Request.

To request a high-resolution version to be translated and/or printed, please complete the form, Creative Brief Task Request.

To request a high-resolution version to be translated and/or printed, please complete the form, Creative Brief Task Request.

HYTORC WASHER- 열 교환에 적용

For a high-resolution version of this cut sheet to have translated and/or printed please complete the form, Creative Brief Task Request

 

The HYTORC Offset Link provides an extension for HYTORC square drive tools allowing operators to tighten bolts that are difficult or impossible to reach with limited overhead clearance or nearby obstructions. The Offset Links also work great where bolts protrude above the nut where standard sockets won’t fit. The Offset Link provides interchangeable cartridges that allow the links to be quickly interchanged in the field to fit different size nuts. The HYTORC Offset Link delivers accurate torque from the square drive tool to the fastener to minimize operator error and improve safety.

The Offset Link is compatible with all HYTORC Hydraulic, Pneumatic and Electric Torque tools. The Offset Link comes in two basic drive types compatible with either ¾” and 1” square drives. The torque multiplication factor for each cartridge is clearly marked; simply multiply the factor by the desired torque and set the torque on the tool for accurate and repeatable bolting operations.

The attached article is one produced by the UK PEG team members Kevin Beaumont, Johnny Fairhurst and Andrew Grabowski as promoted on Linkedin during an LNG marketing campaign in 2020.  Final draught produced by HYTORC Marketing.

The attached article is one devised by the UK PEG team members Kevin Beaumont and Johnny Fairhurst as part of a simple LNG promotional program run on Linkedin during 2020, with some base level content on factors of torque to load repeatability, and also basic bolt preparation.  Final draught was produced by HYTORC marketing department.

To request a high-resolution version to be translated and/or printed, please complete the form, Creative Brief Task Request.

To request a high-resolution version to be translated and/or printed, please complete the form, Creative Brief Task Request.

To request a high-resolution version to be translated and/or printed, please complete the form, Creative Brief Task Request.