Posts per page   25    50    100   

Featured posts


Cut sheet that outlines the HBI Training Programs, with details of training courses, training levels, and certifications.

Customer required a method to bolt the bridge bolts on their separator that can provide credible repeatable torque values to each bolt, this is due to the excessive levels of vibration evident on the plant superstructure

Email format of the HYTORC Bolting Manager quick start guide.

For a high-resolution version of this guide to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email format of the HYTORC Bolting Manager cut sheet.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this procedure to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this guide to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

SINGLE STAGE TENSIONERS

AUTO RETURN TENSIONERS

1500 BAR FITTING

1500 BAR POWER PACK

1500 BAR OUTLET MANIFOLD

1500 BAR FOUR OUTLET MANIFOLD

1500 BAR HOSE

AIR POWER PACK

ELECTRIC PUMP

NUT COLLAR

TOMMY BAR SIZES (1500 BAR)

TOMMY BAR SIZES (TSR/TMR)

TOMMY BAR SIZES (1500 BAR and TSR/TMR)

HYTORC WASHER- 열 교환에 적용

For a high-resolution version of this manual to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

The HYTORC Offset Link provides an extension for HYTORC square drive tools allowing operators to tighten bolts that are difficult or impossible to reach with limited overhead clearance or nearby obstructions. The Offset Links also work great where bolts protrude above the nut where standard sockets won’t fit. The Offset Link provides interchangeable cartridges that allow the links to be quickly interchanged in the field to fit different size nuts. The HYTORC Offset Link delivers accurate torque from the square drive tool to the fastener to minimize operator error and improve safety.

The Offset Link is compatible with all HYTORC Hydraulic, Pneumatic and Electric Torque tools. The Offset Link comes in two basic drive types compatible with either ¾” and 1” square drives. The torque multiplication factor for each cartridge is clearly marked; simply multiply the factor by the desired torque and set the torque on the tool for accurate and repeatable bolting operations.

The attached article is one produced by the UK PEG team members Kevin Beaumont, Johnny Fairhurst and Andrew Grabowski as promoted on Linkedin during an LNG marketing campaign in 2020.  Final draught produced by HYTORC Marketing.

The attached article is one devised by the UK PEG team members Kevin Beaumont and Johnny Fairhurst as part of a simple LNG promotional program run on Linkedin during 2020, with some base level content on factors of torque to load repeatability, and also basic bolt preparation.  Final draught was produced by HYTORC marketing department.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this brochure to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

Email format of the HYTORC GRIP-TIGHT™ Nut cut sheet.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

HYTORC WASHER  Application - (Pipe Flange)

HYTORC Washer Application (Flowmeter Piping)

For an editable or high-resolution version of this brochure to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this booklet to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email and printable formats of the HYTORC Washer Flange Installation Instructions cut sheet.
Printable format has crop marks and bleed.

Preface: The purpose of this article is to provide supportive information related to HYTORC ATEX CE certified equipment. HYTORC ATEX CE equipment is recognized by OSHA in the USA. NOTE: Not all ATEX equipment is recognized by OSHA, there are conditions that apply. HYTORC ATEX CE certificates do meet the conditions and criteria as outlined by OSHA.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email format of the HYTORC Magnetic Backup Wrench cut sheet.
For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

This webinar provides an update of the latest hydraulic pump and wrenches used in heavy duty industrial bolting.  The presentation outlines the various Manual, Fully Automated and Documentation options in the VECTOR pump and new pump options.

 

This module provides an explanation of the features and benefits of the LITHIUM SERIES II Electric Torque Tool. The LITHIUM SERIES II Tool features are discussed in detail including expanded functionality, enhanced durability, and improvement usability.

The Nuclear Industry has challenging constraints related to the cost of outage time and the risks associated with exposure time as related to radiological dose.   To address these challenges during retrofit, upgrade and outage work the industry has adopted some of the most advanced bolting and fastening technologies.   This webinar will explore some of these technologies and will show how they are commonly leveraged during Nuclear power plant maintenance work


HYTORC have over the last few years implemented the use of fully stocked tool cabins to help contractors and companies to minimise downtime on site during outages and shutdowns. They can be manned by experience HYTORC technicians who can assist in an upfront tool familiarisation programme so every operative is competent and safe when operating the tools.

This webinar introduces the ASME PCC-1 Appendix A definition of the Qualified Bolting Specialist with Heat Exchanger Specialization.  The talk discusses the training and in-person instructor led exercises and evaluation leading to the ASME QBS with Heat Exchanger Supplemental Qualification.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email and printable formats of the HYTORC Nut Series.
Printable format has crop marks and bleed.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

HYTORC Donates 1,250 N95 Masks To Local EMS And First Responders In
Mahwah, New Jersey To Support The Fight Against COVID-19.

This report describes tests and results for the HYTORC J-Washer performed at an Independent Test Lab (ITL) during 2020.

For a high-resolution version of this test report to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

HYTORC is introducing a new self-reacting fastener that will remove the need for reaction arms and that also works as a locking washer.   HYTORC couples these self-reacting fasteners with precision industrial tools that can precisely deliver up to 130,000ft-lbs.  These tools are now available with data acquisition compatibility for manufacturing environments that are using Open Protocol.  This webinar will cover the functionality of self-reacting fasteners and examples of how they can be leveraged in industrial manufacturing environments.     

This webinar is to provide Rail Industry clients with various applications that HYTORC has provided solutions for, which has given the user increased safety, speed and schedule. The elimination of fuels onsite along with elimination of Hand Arm Vibration has taken the industry by storm. The webinar will include Track-based Maintenance, OLE Structures and Train Carriage Maintenance. 

This webinar is to provide Rail Industry clients with various applications that HYTORC has provided solutions for, which has given the user increased safety, speed and schedule. The elimination of fuels onsite along with elimination of Hand Arm Vibration has taken the industry by storm. The webinar will include Track-based Maintenance, OLE Structures and Train Carriage Maintenance. 

Email and printable formats of the HY-115/HY-230/HY-400 Pumps cut sheet.

HYTORC is introducing a new self-reacting fastener that will remove the need for reaction arms and that also works as a locking washer.   HYTORC couples these self-reacting fasteners with battery powered torqued tools that can precisely deliver up to 5,000ft-lbs of torque.   This combination of specialized fasteners and precision tooling with data tracking capabilities makes it possible to efficiently and safely pre-load fasteners on the most precarious of mechanical structures.   The webinar will demonstrate the capabilities of these fasteners and how these benefits can be leveraged to improve the safety and reliability of live structures. 

For a high-resolution version of this guide to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Webinar Preview of Safe Bolting Principles and Pracitces course 2020

In good or bad times our HYTORC Standard is designed to continue providing you with Superior Technology, Quality and Customer Support.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this booklet to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Press release detailing HYTORC Receiving the 2020 Good Design Award for the LITHIUM SERIES® II Electric Torque Tool.

For a high-resolution version of any of these materials to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email and printable formats of the Vector Mini Pump cut sheet.
Printable format has crop marks and bleed.

For a high-resolution version of this guide to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this catalog to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

HYTORC and Cambridge, Massachusetts-based Cumulus Digital Systems, Inc. have joined forces on an innovative partnership that is bringing 21st century tech into the bolting industry in new and exciting ways.

For a high-resolution version of this guide to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this manual to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

Email and printable formats of the HYTORC Backup Wrenches cut sheet.
Printable format has crop marks and bleed.

This presentation details how the HYTORC Washer System provides a much safer environment for workers while offering the potential to dramatically reduce or even eliminate the risk of hand injuries during bolting. 

  • Mining Applications
  • Safety Concerns
  • Reaction Arm Pinch Points
  • Backup Wrench Pinch Points
  • Impact
  • Reaction and Backup Washer System
  • Reaction Washer
  • Backup Washer
  • Complete Solution

For a high-resolution version of this booklet to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this booklet to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Available in the following languages; English & German.

Available in the following languages; English & German.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.