Posts per page   25    50    100   

Featured posts


For a high-resolution version of this manual to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

The HYTORC Offset Link provides an extension for HYTORC square drive tools allowing operators to tighten bolts that are difficult or impossible to reach with limited overhead clearance or nearby obstructions. The Offset Links also work great where bolts protrude above the nut where standard sockets won’t fit. The Offset Link provides interchangeable cartridges that allow the links to be quickly interchanged in the field to fit different size nuts. The HYTORC Offset Link delivers accurate torque from the square drive tool to the fastener to minimize operator error and improve safety.

The Offset Link is compatible with all HYTORC Hydraulic, Pneumatic and Electric Torque tools. The Offset Link comes in two basic drive types compatible with either ¾” and 1” square drives. The torque multiplication factor for each cartridge is clearly marked; simply multiply the factor by the desired torque and set the torque on the tool for accurate and repeatable bolting operations.

The attached article is one produced by the UK PEG team members Kevin Beaumont, Johnny Fairhurst and Andrew Grabowski as promoted on Linkedin during an LNG marketing campaign in 2020.  Final draught produced by HYTORC Marketing.

The attached article is one devised by the UK PEG team members Kevin Beaumont and Johnny Fairhurst as part of a simple LNG promotional program run on Linkedin during 2020, with some base level content on factors of torque to load repeatability, and also basic bolt preparation.  Final draught was produced by HYTORC marketing department.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this brochure to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

This video series includes the following:

1. LION GUN Overview
LION Gun Electric Torque Tool 60-Second Overview Promo

2. LION GUN Tool Inspection & Handling
LION Gun Electric Torque Tool video on Tool Inspection and Handling

3. LION GUN Charge, Test and Install Battery
LION Gun Electric Torque Tool video on how to Charge, Test and Install the Battery on the LION Gun

4. LION GUN Navigating the Control Panel & Home Screen
LION Gun Electric Torque Tool video on how to navigate the tool's control panel and home screen

5. LION GUN Operations Menu
LION Gun Electric Torque Tool video on navigating the operations menu of the LION Gun tool.

6. LION GUN System Menu
LION Gun Electric Torque Tool video on navigating the System Menu on the LION Gun tool.

7. LION GUN Admin Menu
LION Gun Electric Torque Tool video on navigating the Admin Menu on the LION Gun tool.

8. LION GUN Profiles
LION Gun Electric Torque Tool video on setting up profiles on the LION Gun tool.

9. LION GUN Data Collection
LION Gun Electric Torque Tool video on how to set up Data Collection on the LION Gun tool

10. LION GUN Conventional Bolting
LION Gun Electric Torque Tool video on conventional bolting with the LION Gun tool and export it to a computer.

11. LION GUN Bolting with the HYTORC Washer
LION Gun Electric Torque Tool video on bolting with the HYTORC Washer with the LION Gun tool.

12. LION GUN Bolting with the HYTORC Nut
LION Gun Electric Torque Tool video on bolting with the HYTORC Nut on the LION Gun tool.

13. LION GUN Bolting with the Wheel Extension Fixture
LION Gun Electric Torque Tool video on bolting with the Wheel Extension Fixture with the LION Gun tool.

14. LION GUN Bolting with the Track-Pad Wheel Extension
LION Gun Electric Torque Tool video on bolting with the Track-Pad Wheel Extension on the LION Gun tool.

15. LION GUN Bolting with the Wheel Bolting Software

LION Gun Electric Torque Tool video on bolting with the Wheel Bolting Software on the LION Gun tool.

16. LION GUN Wheel Bolting Software Using the Track-Pad Wheel Extension

LION Gun Electric Torque Tool video on using the Wheel Bolting Software with the Track-Pad Wheel Extension on the LION Gun tool.

Email format of the HYTORC GRIP-TIGHT™ Nut cut sheet.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

HYTORC WASHER  Application - (Pipe Flange)

HYTORC Washer Application (Flowmeter Piping)

For an editable or high-resolution version of this brochure to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Ce Webinar en Français est une introduction aux solutions de serrages HYTORC.
Les écrous et rondelles HYTORC révolutionnent les procédés de mise en tension des boulonneries industrielles. Nous couvrirons les considérations techniques de l’ingénierie jusqu’aux montages sur site en démontrant comment garantir une sécurité optimum pour les opérateurs tout en réduisant les temps de montage. La conformité à l’ASTM 3394 vous confortera dans l’adoption des rondelles de réaction.

For a high-resolution version of this booklet to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email and printable formats of the HYTORC Washer Flange Installation Instructions cut sheet.
Printable format has crop marks and bleed.

Preface: The purpose of this article is to provide supportive information related to HYTORC ATEX CE certified equipment. HYTORC ATEX CE equipment is recognized by OSHA in the USA. NOTE: Not all ATEX equipment is recognized by OSHA, there are conditions that apply. HYTORC ATEX CE certificates do meet the conditions and criteria as outlined by OSHA.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email format of the HYTORC Magnetic Backup Wrench cut sheet.
For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

This webinar provides an update description of the HYTORC Washer System, the ASTM 3394 Standard and the new J-Washer.  The presentation emphasizes the features, benefits, applications and installation tips for the new washer system.

This webinar introduces the two-day ASME PD577 course which covers bolting science and practice for managers and engineers.  This presentation provides an outline for the course objectves, class syllabus, training delivery style and samples of content leading to the ASME certificate.

This webinar provides an update of the latest hydraulic pump and wrenches used in heavy duty industrial bolting.  The presentation outlines the various Manual, Fully Automated and Documentation options in the VECTOR pump and new pump options.

 

This module provides an explanation of the features and benefits of the LITHIUM SERIES II Electric Torque Tool. The LITHIUM SERIES II Tool features are discussed in detail including expanded functionality, enhanced durability, and improvement usability.

The Nuclear Industry has challenging constraints related to the cost of outage time and the risks associated with exposure time as related to radiological dose.   To address these challenges during retrofit, upgrade and outage work the industry has adopted some of the most advanced bolting and fastening technologies.   This webinar will explore some of these technologies and will show how they are commonly leveraged during Nuclear power plant maintenance work


HYTORC have over the last few years implemented the use of fully stocked tool cabins to help contractors and companies to minimise downtime on site during outages and shutdowns. They can be manned by experience HYTORC technicians who can assist in an upfront tool familiarisation programme so every operative is competent and safe when operating the tools.

This webinar introduces the ASME PCC-1 Appendix A definition of the Qualified Bolting Specialist with Heat Exchanger Specialization.  The talk discusses the training and in-person instructor led exercises and evaluation leading to the ASME QBS with Heat Exchanger Supplemental Qualification.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this guide to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email and printable formats of the HYTORC Nut Series.
Printable format has crop marks and bleed.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

HYTORC Donates 1,250 N95 Masks To Local EMS And First Responders In
Mahwah, New Jersey To Support The Fight Against COVID-19.

This report describes tests and results for the HYTORC J-Washer performed at an Independent Test Lab (ITL) during 2020.

For a high-resolution version of this test report to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.