Posts per page   25    50    100   

Customer required a method to bolt the bridge bolts on their separator that can provide credible repeatable torque values to each bolt, this is due to the excessive levels of vibration evident on the plant superstructure

HYTORC WASHER- 열 교환에 적용

The HYTORC Offset Link provides an extension for HYTORC square drive tools allowing operators to tighten bolts that are difficult or impossible to reach with limited overhead clearance or nearby obstructions. The Offset Links also work great where bolts protrude above the nut where standard sockets won’t fit. The Offset Link provides interchangeable cartridges that allow the links to be quickly interchanged in the field to fit different size nuts. The HYTORC Offset Link delivers accurate torque from the square drive tool to the fastener to minimize operator error and improve safety.

The Offset Link is compatible with all HYTORC Hydraulic, Pneumatic and Electric Torque tools. The Offset Link comes in two basic drive types compatible with either ¾” and 1” square drives. The torque multiplication factor for each cartridge is clearly marked; simply multiply the factor by the desired torque and set the torque on the tool for accurate and repeatable bolting operations.

The attached article is one produced by the UK PEG team members Kevin Beaumont, Johnny Fairhurst and Andrew Grabowski as promoted on Linkedin during an LNG marketing campaign in 2020.  Final draught produced by HYTORC Marketing.

The attached article is one devised by the UK PEG team members Kevin Beaumont and Johnny Fairhurst as part of a simple LNG promotional program run on Linkedin during 2020, with some base level content on factors of torque to load repeatability, and also basic bolt preparation.  Final draught was produced by HYTORC marketing department.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

Email format of the HYTORC GRIP-TIGHT™ Nut cut sheet.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

HYTORC WASHER  Application - (Pipe Flange)

HYTORC Washer Application (Flowmeter Piping)

For an editable or high-resolution version of this brochure to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this cut sheet to have translated and/or printed, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

This webinar introduces the ASME PCC-1 Appendix A definition of the Qualified Bolting Specialist with Heat Exchanger Specialization.  The talk discusses the training and in-person instructor led exercises and evaluation leading to the ASME QBS with Heat Exchanger Supplemental Qualification.

For a high-resolution version of this cut sheet to have translated and/or printed please email Betsy at Btapp@hytorc.com.

 

This webinar is to provide Rail Industry clients with various applications that HYTORC has provided solutions for, which has given the user increased safety, speed and schedule. The elimination of fuels onsite along with elimination of Hand Arm Vibration has taken the industry by storm. The webinar will include Track-based Maintenance, OLE Structures and Train Carriage Maintenance. 

HYTORC is introducing a new self-reacting fastener that will remove the need for reaction arms and that also works as a locking washer.   HYTORC couples these self-reacting fasteners with battery powered torqued tools that can precisely deliver up to 5,000ft-lbs of torque.   This combination of specialized fasteners and precision tooling with data tracking capabilities makes it possible to efficiently and safely pre-load fasteners on the most precarious of mechanical structures.   The webinar will demonstrate the capabilities of these fasteners and how these benefits can be leveraged to improve the safety and reliability of live structures. 

For a high-resolution version of this guide to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

This Q&A live webcast will introduce the latest developments in safety, productivity and quality for bolting work in the Power Generation Industry.

We will highlight the following areas to revolutionize your current maintenance process:

• Hydraulic, Pneumatic and Battery Torque Wrench Options and Considerations
• Fastener Options for Torque and Tension
• Combined Cycle, Fossil, Wind and Nuclear Installation Examples
• Hand Safety Solutions
• The HYTORC Standard

Link to Q&A: https://library.hytorc.com/posts/3062

Description: This live webcast will introduce the latest developments in safety, productivity and quality for bolting work in the Power Generation Industry.

We will highlight the following areas to revolutionize your current maintenance process:

• Hydraulic, Pneumatic and Battery Torque Wrench Options and Considerations
• Fastener Options for Torque and Tension
• Combined Cycle, Fossil, Wind and Nuclear Installation Examples
• Hand Safety Solutions
• The HYTORC Standard

Superbolt application M42x4.5
36 bolts per flange
Time : 2 DAYS for tightening

HYTORC Low Clearance Nut 
36 Bolts per flange
Time : 2 HOURS !

For a high-resolution version of this booklet to have translated and/or printed, or if you need a smaller version for email, please email art@hytorc.com and Betsy at Btapp@hytorc.com.

For a high-resolution version of this catalog to have translated and/or printed please email art@hytorc.com and Betsy at Btapp@hytorc.com.

This presentation details how the HYTORC Washer System provides a much safer environment for workers while offering the potential to dramatically reduce or even eliminate the risk of hand injuries during bolting. 

  • Mining Applications
  • Safety Concerns
  • Reaction Arm Pinch Points
  • Backup Wrench Pinch Points
  • Impact
  • Reaction and Backup Washer System
  • Reaction Washer
  • Backup Washer
  • Complete Solution