For a high-resolution version of this manual to have translated and/or printed please email firstname.lastname@example.org and Betsy at Btapp@hytorc.com.
Booklet that outlines the HYTORC Bolting Institute, with details of online or in-person classes, course load, training levels, certification, closing with the HYTORC Standard and our mission statement.
IMPORTANT: Pricing and availability subject to change without notice.
HYTORC WASHER- 열 교환에 적용
The HYTORC Offset Link provides an extension for HYTORC square drive tools allowing operators to tighten bolts that are difficult or impossible to reach with limited overhead clearance or nearby obstructions. The Offset Links also work great where bolts protrude above the nut where standard sockets won’t fit. The Offset Link provides interchangeable cartridges that allow the links to be quickly interchanged in the field to fit different size nuts. The HYTORC Offset Link delivers accurate torque from the square drive tool to the fastener to minimize operator error and improve safety.
The Offset Link is compatible with all HYTORC Hydraulic, Pneumatic and Electric Torque tools. The Offset Link comes in two basic drive types compatible with either ¾” and 1” square drives. The torque multiplication factor for each cartridge is clearly marked; simply multiply the factor by the desired torque and set the torque on the tool for accurate and repeatable bolting operations.
The attached article is one produced by the UK PEG team members Kevin Beaumont, Johnny Fairhurst and Andrew Grabowski as promoted on Linkedin during an LNG marketing campaign in 2020. Final draught produced by HYTORC Marketing.
The attached article is one devised by the UK PEG team members Kevin Beaumont and Johnny Fairhurst as part of a simple LNG promotional program run on Linkedin during 2020, with some base level content on factors of torque to load repeatability, and also basic bolt preparation. Final draught was produced by HYTORC marketing department.
For a high-resolution version of this brochure to have translated and/or printed please email email@example.com and Betsy at Btapp@hytorc.com.
HYTORC WASHER Application - (Pipe Flange)
HYTORC Washer Application (Flowmeter Piping)
For a high-resolution version of this booklet to have translated and/or printed please email firstname.lastname@example.org and Betsy at Btapp@hytorc.com.
Email and printable formats of the HYTORC Washer Flange Installation Instructions cut sheet.
Printable format has crop marks and bleed.
Preface: The purpose of this article is to provide supportive information related to HYTORC ATEX CE certified equipment. HYTORC ATEX CE equipment is recognized by OSHA in the USA. NOTE: Not all ATEX equipment is recognized by OSHA, there are conditions that apply. HYTORC ATEX CE certificates do meet the conditions and criteria as outlined by OSHA.